626 results
Engineering handout microsofts
"Elevation Documentary - How Drones Will Change Cities" Video Viewing Guide
"Dezeen – Elevation Documentary – How Drones Will Change Cities" is an 18-minute video by the online architecture magazine Dezeen that discusses how drones will change cities, architecture, the way people travel, the way goods are delivered, and the way buildings are constructed in the future. It would be a great addition to any CTE or STEM class.The video viewing guide is a resource that will keep students engaged in the video and is thorough enough to serve as a great study guide for later use
Grades:
7th - 12th
Types:
STEM CHALLENGE: EARTHQUAKE PROOF BUILDING
This is a STEM design challenge where students will design an earthquake proof building, place it on a shake table and see if it survives an earthquake. Have students compete to make the best design by following the design process. Each packet includes the lesson plan which follows the design process, instructions on how to perform the challenge and a prototyping worksheet.
Subjects:
Grades:
6th - 10th
Types:
Also included in: STEM DESIGN CHALLENGE BUNDLE
Dream Big: Engineering Our World
This is a 12 question video guide for the IMAX film Dream Big: Engineering Our World. This is a 45 minute film about how engineers are making a difference in our world today. I show this film to my 7th grade class when we're learning about the Engineering Design Process. The answer key is included.
Subjects:
Grades:
6th - 8th
Types:
Building a Solar Oven; A STEM Project
This is a one week STEM science project for grades 7-12. Students research, design and build a solar oven. They test it and collect data, graph results and draw some conclusions about effective design and construction. Some of the questions and research also require students to look into how homes can take advantage of solar energy.
Subjects:
Grades:
7th - 12th
"Modern Marvels - Welding" Video Viewing Guide
“Modern Marvels” is a video series that focuses on the effect and use of technology in various aspects of modern society. It aired on the History Channel. Each video is approximately 45-50 minutes in length and would be a great addition to any CTE or STEM class.The “Welding” episode discusses how technology is used in relation to electric arc welding, stick welding, explosion welding, underwater welding, industrial spot welding, and friction welding with plastics.The video viewing guide is a res
Grades:
7th - 12th
Types:
The Junkyard Wonders Stem Activity
Do you love Patricia Polacco? Her amazing story The Junkyard Wonders is the perfect book for a STEM activity. In this engaging challenge students will be asked to create an airplane that must fly for a minimum of 4 seconds. Unlike the airplane in the story their plane can not use fuel!! This download includes: - Detailed teacher directions- Suggested lesson strategies - Detailed material list - Just print your student packet and watch them create! ***Make sure to print in Landscape mode and sel
Subjects:
Grades:
2nd - 5th
Types:
Engineering Design: Playground Swing (Aligns with NGSS 3-5-ETS1-1, 2, & 3)
Engineering Design: Playground Swing (Aligns with NGSS 3-5-ETS1-1, 2, & 3)This NGSS aligned STEM project engages your students with a hands-on experience in designing and building a playground swing. While doing this project, they will learn and understand the engineering design process.This lesson addresses NGSS Performance Expectation NGSS 3-5-ETS1-1, 2, &3: Define a simple design problem, generate and compare multiple solutions, and plan and carry out fair tests. The lesson draws
Subjects:
Grades:
4th - 7th
CCSS:
NGSS:
3-5-ETS1-3
, 3-5-ETS1-1
, 3-5-ETS1-2
Also included in: NGSS Fifth Grade Science Curriculum Bundle | Phenomena-Based Lessons!
STEM Project, Making a Catapult: Force, Work, Power and Energy
This is an exciting, hands-on STEM project in which students make small catapults with classroom supplies and collect data to calculate force, work, power, momentum and kinetic energy. At the end of the project the class can set up and compete in mini battles with their catapults in whatever type of games you want to come up with. Some game suggestions are given.
Subjects:
Grades:
9th - 12th
Types:
NGSS:
HS-PS3-2
, HS-PS3-1
, HS-PS3-3
Lego Mindstorms EV3 Robotics using the EV3 Classroom App
This 165 page comprehensive teacher resource set explains the fundamentals of the Lego Mindstorms EV3 using the EV3 Classroom App. Included with the set is a PDF and PowerPoint slide deck that can be used to teach students about robotics and the EV3 platform.The set also includes a 165-page teacher’s handout that has guided notes throughout the entire slide deck. This can be used to help the teacher explain the slides and also provides tips on how to work with the students and the robots.These l
Grades:
Not Grade Specific
Also included in: Lego Mindstorms EV3 Robotics (Multiple App Bundle)
"Drain the Titanic" Video Viewing Guide
“Drain the Ocean” is a documentary series that aired on National Geographic. The episodes use underwater scanning technology, historical and scientific data, and digital imagery to explore and reveal shipwrecks, treasures, and other items that are found deep underwater. Each video is approximately 40-45 minutes in length and would be a great addition to any CTE or STEM class.The “Drain the Titanic” episode discusses the pattern of wreckage on the ocean floor and how that was used to hypothesize
Grades:
7th - 11th
Types:
Small Space Wonders: An Easy-to-Implement Tiny Home Design Challenge
Craft Your Ideal Tiny Home: An Interactive and Imaginative Student Activity is a vibrant, hands-on educational toolkit designed to immerse students in the fascinating realm of tiny house architecture. This resource provides an engaging platform for students to explore tiny house design through the use of ready-to-use floor plan symbols. It's crafted to stimulate creativity and practical skills, enabling students to employ these symbols in constructing their own distinct tiny house layouts, furth
Grades:
8th - 11th
Also included in: Ultimate Interior Design Bundle for FCS, FACS, Art
"Modern Marvels - Nikola Tesla's Mad Electricity" Video Viewing Guide
“Modern Marvels” is a video series that focuses on the effect and use of technology in various aspects of modern society. It aired on the History Channel. Each video is approximately 45-50 minutes in length and would be a great addition to any CTE or STEM class.The “Nikola Tesla's Mad Electricity” episode discusses innovative developments and workings of Nikola Tesla, including the Tesla Coil, Tesla’s work at Wardenclyffe, the rivalry pitting Tesla’s alternating current against Edison’s direct c
Grades:
7th - 12th
Types:
"Food Evolution" Video Viewing Guide
"Food Evolution" is a 50-minute video that discusses the arguments for and against GMOs - genetically modified foods. The documentary highlights the regulations and conflict concerning genetic engineering of papayas in Hawaii, the research of banana wilt in Africa, and strong differing views concerning GMOs in the United States. It would be a great addition to any CTE or STEM class.The video viewing guide is a resource that will keep students engaged in the video and is thorough enough to serve
Grades:
7th - 12th
Types:
Editable STEM Club Flyer and Permission Form
Editable full-color STEM Club Flyer with permission form.
Subjects:
Grades:
Not Grade Specific
Types:
"Modern Marvels - Hydraulics" Video Viewing Guide
“Modern Marvels” is a video series that focuses on the effect and use of technology in various aspects of modern society. It aired on the History Channel. Each video is approximately 45-50 minutes in length and would be a great addition to any CTE or STEM class.The “Hydraulics” episode discusses the physics of hydraulics and how pressure is increased, the advancement of the use of hydraulics in machinery over time, and the various uses of hydraulics today in airplanes, construction equipment, an
Grades:
7th - 12th
Types:
"Steve Bleile - GMAW (Mig) Wire Feed" Video Viewing Guide
Steve Bleile is a welder. (That is the first thing he will tell you in his videos.) But not only is he a very experienced welder, he is also a great welding instructor. From 1998-2003, he filmed several welding instructional videos. Over 4,000 high school, college, and industrial welding programs have used his videos in their programs. Each video is approximately 42-59 minutes in length, packed with useful information, and would be a great addition to any metalworking or welding class. The 45-mi
Grades:
9th - 12th
Types:
"Modern Marvels - Harvesting" Video Viewing Guide
“Modern Marvels” is a video series that focuses on the effect and use of technology in various aspects of modern society. It aired on the History Channel. Each video is approximately 45-50 minutes in length and would be a great addition to any CTE or STEM class.The “Harvesting” episode discusses the history of harvesting, future harvesting methods, and the current tools, equipment, and methods used to harvest wheat, cotton rice, sugar beets, tomatoes, walnuts, olives, lettuce, grapes, raisins, a
Grades:
7th - 12th
Types:
Cardboard Boat Project
Will you sink or float? This STEM cardboard boat project is intended for schools with access to a pool or lake. In the project students learn about buoyancy and apply the principles to develop a cardboard boat capable of carrying 2 people. The students work through the design cycle as they build prototypes, do research, and modify their boats. The project lasts around 7 class periods, culminating in a competition on the last day. Files include PowerPoints and handouts. The project was designed f
Subjects:
Grades:
9th - 12th
NGSS:
HS-ETS1-2
Also included in: Complete Physics Activity Bundle
"Steve Bleile - Arc Welding I" Video Viewing Guide
Steve Bleile is a welder. (That is the first thing he will tell you in his videos.) But not only is he a very experienced welder, he is also a great welding instructor. From 1998-2003, he filmed several welding instructional videos. Over 4,000 high school, college, and industrial welding programs have used his videos in their programs. Each video is approximately 42-59 minutes in length, packed with useful information, and would be a great addition to any metalworking or welding class. The 47-mi
Grades:
9th - 12th
Types:
Paper Helicopters Engineering Design Challenge Hands On STEM Activity FUN!
Do you want a super easy, download and go, fun engineering design challenge? No extra materials (except copy paper) are required! SPIN into STEM with this hands on, problem solving, cooperative learning, Engineering Project - Paper Helicopter Activity! This activity is aligned with NGSS, MYP and other International Science and Engineering Standards.Improve student engagement and get your middle school students involved in the engineering design process by conducting this student centered, any ti
Subjects:
Grades:
5th - 9th
NGSS:
MS-ETS1-2
, MS-ETS1-4
, MS-ETS1-1
Optics: Ray Diagrams for Lenses & Mirrors
Tired of searching for a complete lens and mirror ray diagram teaching resource? No need to search further! This resource contains everything you need for teaching convex and concave lenses and mirrors. You get a full set of notes for each device, several sets of exercises for students to practice drawing ray diagrams, and complete presentations to use during instruction. There is a link to the related video from my Step by Step Science YouTube channel at the top of each worksheet. These videos
Subjects:
Grades:
9th - 12th, Higher Education
Also included in: Optics Complete Unit Bundle
33 Different Photos Of Bridges Sorted Into Their 6 Types
This is a wonderful collection of 33 different images of bridges, photographed at different times of the day.
This resource would make an excellent introduction to anyone teaching about bridges. It also has a link at the end of the presentation to a great set of teaching and studying notes about the 5 main types of bridges.
I would especially use this resource if I were going to present a bridge building challenge to my class, so they have an idea about the different ways they could build a l
Grades:
Not Grade Specific
Types:
"Steve Bleile - Arc Welding II" Video Viewing Guide
Steve Bleile is a welder. (That is the first thing he will tell you in his videos.) But not only is he a very experienced welder, he is also a great welding instructor. From 1998-2003, he filmed several welding instructional videos. Over 4,000 high school, college, and industrial welding programs have used his videos in their programs. Each video is approximately 42-59 minutes in length, packed with useful information, and would be a great addition to any metalworking or welding class. The 46-mi
Grades:
9th - 12th
Types:
Lesson Bundle- Automation and Manufacturing
This bundle includes all of the resources for my lesson on automation in manufacturing, including the lesson slides, guided notes document (with answer key), and the standards-aligned lesson plan. Introduce your students to the world of manufacturing. Show them how it has evolved over time into the high-tech machine that it is today. Help your classes understand the impacts of the industrialized world, and their place within it. This lesson is a great fit for middle or high school technology and
Grades:
8th - 11th
Showing 1-24 of 626 results
TPT is the largest marketplace for PreK-12 resources, powered by a community of educators.
IXL family of brands